01-00048 Brake disc puller, Ø260 – 330 mm

Description

See each set for recommended cylinder. Brake disc/rotor puller Ø260 - 336 mm (10 - 13.22'')
Rusted and seized brake discs/rotors are an all too common problem on many car models. Heavy hammering is frequently used to get
the disc/rotor off the hub. This is devastating for the wheel bearing and other sensitive parts in the wheel suspension, sometimes even triggering and deploying airbags. This all new puller will safely and effectively pull the disc/rotor with Ø260 – 336 mm (10 – 13.22”) off the hub with up to 22 Ton.
No damage on the wheel bearing or other sensitive parts, quick, easy and safe. The high force is spread out evenly on four positions to minimize the risk of cracking the disc/rotor. If the disc/rotor brakes off, the remaining disc/rotor hub guide can be cut by machine. In case the fixing plate 01-00041-002 is already available from other tools, 01-00048-030 (See parts in the set pos 3 – 8) can be used for a full function. Storage foam is included in both sets.

Rec. cyl 1090-02-WAL/01-00030.

Contains these parts:
01-00041-002 - Fixing plate
2 pcs 01-00018-004 - Screw
4 pcs 01-00048-001 - Puller arm
2 pcs 01-00048-002 - Fixing plate
2 pcs 01-00041-003 - Sliding plate
8 pcs 01-00041-005 - Screw M14x45
04-00028-011 - Safety strap
04-00023-005 - Foam

EU Protected Design-RCD No. 007749148-0001
EU Protected Design-RCD No. 003477090-0001/0002
EU Patent No. EP3323553
US Patent No. 10.532.450
US Design Patent No. D850.226